来宝网Logo

热门词: 日本凯特HG-770快速水分测定仪日本凯特KH-50纸张水分测定仪德国普兰德塑料刻度移液管BR27614

Endress+Hauser e+h法兰型热式质量流量计A150

价  格:询价

产  地:江苏更新时间:2020-11-03 11:06

品  牌:恩德斯豪斯型  号:A150

状  态:正常点击量:2012

400-006-7520
联系我时,请说明是在上海非利加实业有限公司上看到的,谢谢!

上海非利加实业有限公司

联 系 人: 上海非利加实业有限公司

电   话: 400-006-7520

传   真: 400-006-7520

配送方式: 上海自提或三方快递

联系我时请说在上海非利加实业有限公司上看到的,谢谢!



The t-mass A 150流量计专门适用于经济型测量和常用气体的简单监测,特别应用于压缩空气。它是亚计量应用中的趋势,坚固的***体式铝合金外壳,使用四线制技术。有带显示器和无显示器版本可选。用户特定的设置可以保存在显示器上,也可以通过显示器从***台设备传递到另***台设备。

Endress+Hauser e+h法兰型热式质量流量计A150优势

适合小口径中空气、氮气、二氧化碳和氩气的测量

优化过程监测:即使在低压和低流速中也能方便的测量

经济型测量:安装简便,压损可忽略不计,免维护

可靠流量趋势:多变量测量

快速有效调试:引导式操作菜单

高工厂适应性:自诊断和错误监测

自动恢复数据,便于服务

Endress+Hauser e+h法兰型热式质量流量计A150应用领域

该测量原理具有高可操作测量范围,能直接测量质量流量

适用于小口径管道内的空气、氮气、二氧化碳和氩气测量

仪表特性

插入型适用于公称管径为 DN 15~ 50 (1/2 ~ 2")的管道

过程压力可达 PN 40, Class 300

多种过程连接形式可选

***体化型带 DC 24 V 电源供电

4-20 mA HART, 脉冲/频率/开关量输出

紧凑和坚固的变送器


产品参数


产品介绍

Endress+Hauser e+h法兰型热式质量流量计A150特征和规格

测量原理热式
主要特点The flowmeter for cost‐effective measurement and easy monitoring of utility gases. Suitable for air, nitrogen, carbon dioxide and argon in small line sizes.
特点Optimal process monitoring – easy measurement even at low pressures and flow velocities. Costeffective measurement – easy installation, negligible pressure loss and maintenance‐free. Reliable flow trending – multivariable measurement. Inline version: nominal diameter DN 15 to 50 (? to 2").
Process pressure up to PN 40, Class 300.
Transmitter featuresFast and efficient commissioning – guided operating menus. High plant availability – self‐diagnostics and error monitoring. Automatic recovery of data for servicing. Device in compact version with DC 24 V power supply. 4‐20 mA HART, pulse/frequency/switch output.
直径DN 15 to 50 (? to 2")
Wetted materialsTransducer: 1.4404 (316L)
Insertion tube: 1.4404 (316L)
Measuring tube: 1.4404 (316L); 1.4435 (316L)
Connection: 1.4404 (F316/F316L); 1.4404 (316L); 1.4435 (316L)
Measured variablesMass flow, temperature, corrected volume flow, FAD volume flow
测量误差3 % o.r.
4 % o.r.
5 % o.f.s.
(depending on chosen option of ordering feature "Calibration flow")
量程0.5 to 910 kg/h (1.1 to 2002 lb/h)
0.5 to 1365 kg/h (1.1 to 3003 lb/h)
(for air, depending on chosen option of ordering feature "Calibration flow")
压力范围PN 40, Class 300
过程温度–40 to +100 °C (–40 to +212 °F)
环境温度–40 to +60 °C (–40 to +140 °F)
Transmitter housing materialAlSi10Mg, coated
电子插件的防护IP66/67, type 4X enclosure
显示/操作4‐line display with push Buttons
Configuration via local display and operating tools possible
输出4‐20 mA HART (active)
Pulse/frequency/switch output (passive)
输入Status input
通信HART
Power supplyDC 18 to 30 V
防爆认证ATEX, IECEx, cCSAus
Metrological approvals and certificatesCalibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR
Pressure approvals and certificatesPED, CRN




猜你喜欢

关于我们客户服务产品分类法律声明